GENERAL ENGINEERING CONTRACTOR

Equipment for Sale

Note: Photos are for illustrative purposes, and do not represent actual equipment for sale.

New

Produced Water Solids Storage Tank & Pumps (Complete)

Mfg: Daniel Worthington
Tank receives produced water and suspended solids from produced water CPI's or other sources. Water solids are pumped into the PWSS tank.
Solids are initially separated by cyclone separator mounted on top of tank. Solids accumulate and further separate in the storage tank while the small amount of separated liquid from the cyclone separator and tank is recycled back into the CPI's.
System Includes: Produced Water Solids Storage Tank, Steel Structure, and Pumps.

Produced Water Coolers / Fin-Fans

Mfg: Hudson Products Corp.
Fin-Fan Air Cooled Heat Exchangers; each exchanger is designed to handle 5,000 bpd of produced water. Total flow of the (2) parallel exchangers would be 10,000 bpd. They are designed to cool produced water from 180° F. to 150° F. Each exchanger is rated at 5.5 MMBtu/Hr.

Utility & Instrument Air System (Complete)

Mfg: Atlas Copco, Kemp Mfg., Profab, Inc.
Compressor Type: Screw; Design Rating: 200scfm @ 150 psig, 75 HP; Electric Motor Driven, 75 HP @ 3600 RPM.
System Includes: 2 Instrument / Utility Air Compressors, Coalescer, Control Panel, Instrument Air Dryer, Utility Air & Instrument Receivers, Inlet Air Filter, Oil Resevoir, Air / Lube Oil Fin-Fan Cooler, etc.

Surge (Double Walled) Drum & Pumps (Complete)

Mfg: Riley-Beaird, Reliance Electric
Size: 12'6" ID x 50' T/T; Design Pressure: 50 psig; Design Temp: 250° F.; Design Flow: 50Mbpd, 2.5 Mmscfd; Ansi Class: 150; Internals: Inlet Diverter, Removable Mist Extractor, Fixed Weir, 2 Vortex Breakers;
Appurtenances: 4 Sample Connectors, (2) 24 "Manways 2" Insulation.
System Includes: Surge Drum Oil Pumps (Twin Screws, 840 GPM @ 214 psig, 200 HP @ 1,750 RPM), Surge Drum Water Pumps (Centrifugal, 100 GPM @ 32 psig, 5 HP @ 1.750).

Heat Train System / Vacuum & Heat Transfer (Complete)

Mfg: Graham Mfg. Co.
The Surge Drum Feed / ESC Water Exchangers receive crude emulsion from leak detection meters. Heat exchangers are designed to increase the fluid temperature to 183° F., thereby reducing viscosity of emulsion to enhance the subsequent separation of the crude emulsion and gas.
System Includes: Surge Drum Feed (Type: TEMA AES, Size: 14" x 12'6" E/E, Surface Area 221 sq ft.; Design Pressure / Temp: 215 psig, 325° F.; Design Duty: 1.69 MMBtu/Hr.; ANSI Class: 150);
ESC Water Exchangers (Cold Side=Wet Crude, Hot Side=Hot Produced Water; Type: Plate; Size: 43" wide x 6'8" high x 10' long; Surface Area 2,626 sq ft.; Design Pressure / Temp 215 psig, 275° F.; Design Duty: 6.45 MMBtu/Hr.; ANSI Class: 150);
Shell & Tube Exchangers (Design Pressure & Temp 215 psig, 325° F.; Design Duty: 1.69 MMBtu/Hr.);
Plate Exchangers (Designed Pressure & Temp 215 psig, 275° F.; Design Duty: 6.45 MMBtu/Hr.);
Monitoring & Instrumentation Control System, Process Control System, Misc. Instruments.

Lo-Cat Gas Treatment System (Complete)

Mfg: ARI International
The Lo-Cat System removes H2S from produced sour gas prior to its use as fuel gas in the hot water heaters or as blanket gas from low pressure tanks. The sour gas is routed to Lo-Cat System from the vapor recovery discharge scrubbers. System is designed to reduce the H2S to 0.41 Mmscfd of sour gas from a maximum of 3,000 ppmv.
System Includes: Absorber (Size: 5'ID x 30'OD; Capacity: 2600 Gallons; Rating: 70 psig @ 150° F.); Oxidizer (Size: 3'ID x 30'OH; Capacity: 1000 Gallons; Rating: Atmospheric); Solution Circulation Pumps (Centrifugal; Design Rating: 153 gpm @ 1750 RPM, 20 HP); Oxidizer Air Blower (Rotary Lobe, 60 cfm @ 12 psig, 7.5 HP); Sulfur Slurry Disposal Pump (Screw Type, .02 to .20 gpm, .5 HP); Electric Heater (Flanged Immersion, 20 kW, ANSI 150); Various other components.

Leak Detection Unit (Complete)

Service for Wet Oil.
Leak Detection Unit provides temperature & pressure compensated records of crude emulsion flow received production sources. In addition, the system provides an automatic & continuous sampling of the crude stream for subsequent laboratory analysis. The system consists of three identical trains, each sized 50% of the total capacity. The unit is capable of handling a 20" crude emulsion pipeline and up to 25,000 bpd of crude emulsion.
System Includes: (3) Leak Detection Units; (3) Meter Runs;
(Design Pressure: 260 psig; Design Temp: 180° F.; Flow Rate: 730 gpm, 150 gpm minimum; Fluid Density: 60 lb/Ft³ Viscosity: 600cs @ 177° F.);
Strainers, Deaerator, Static Mixers, BS&W Probe, Pressure & Temp Transmitters, Samplers, Rotary Positive Displacement Flow Meters, Control Panels, and various other components.

Hydrocarbon Vapor Recovery System (Complete)

Mfg (Compressors): Worthington
Horizontal Opposed Reciprocating; Rated H/P 125 @ 885 RPM;
Electrical / 460 Volts / 3 Phase / 60 Hertz.
System Includes: (Dual systems for all components) Compressors; Stage 1 & 2 Recovery Suction Scrubbers; Discharge Scrubbers; Compressor Cooling Water Tank; Surge Drum Vapor Cooler; Vapor Recovery Discharge Cooler; Intercooler; Cooling Water Exchanger; Freon Refrigeration System; Vapor Recovery Water Pumps; etc.

Firewater System (Partial)

Mfg: Nijhuis
Supplies/supports foam or water spray system. Capacity: 3500 gpm.

Used

Pressure Vessel

Mfg: BT Corporation
9/16 Wall Thickness; Design Temp: 300° F. @ 220 psi. Serial #C1886.

Propane / Gas Storage Tanks / Pressure Vessels

Various Sizes and Manufacturers - Call for details and specs.

Produced Water Coolers / Fin-Fans

Mfg: Hudson Products Corp.
Fin-Fan Air Cooled Heat Exchangers; each exchanger is designed to handle 5,000 bpd of produced water. Total flow of the (2) parallel exchangers would be 10,000 bpd. They are designed to cool produced water from 180° F. to 150° F. Each exchanger is rated at 5.5 MMBtu/Hr.

Vertical Liquid Hydrocarbon Still (Propane Vapor)

Length: 91'; Design Pressure / Temp 120 psig, 470° F.; Shell 5/16 & 7/16 Thick, Head 5/16 & 3/8 Thick.

Vertical Inlet Knockout Drum

Mfg: Buehler Tank
6' Length x 24" Diameter; Design Pressure: 240 psi; Design Temp: 650° F.; Shell 5/16", Head 5/16".

Horizontal Oil - Natural Gas Storage Vessels

Mfg: Buehler Tank
43' Length x 90" Diameter; Design Pressure: 85 psi; Design Temp: -20° to 650° F.; Shell 5/16" Thick.

Horizontal Propane - Natural Gas - Gasoline Storage Tanks

Various Manufacturers - Call for detailed descriptions.

Heater Treaters

Mfg: Trico-Superior / National Board / Rheem Superior
All vessels built to ASME Code.
Trico-Superior #X3873; Design Pressure & Temp: 50 psig @ 20° to 650° F.; 10' x 65'.
National Board #S1037-177; Design Pressure & Temp: 50 psig @ 20° to 200° F.; 10' x 37'5".
National Board #S1037-156; Design Pressure & Temp: 50 psig @ 20° to 200° F.; 10' x 37'5".
National Board #S1040-476; Design Pressure & Temp: 50 psig @ 20° to 250° F.; 10' x 37'5".
Rheem Superior #X2954; Design Pressure & Temp: 60 psig @ 20° to 650° F.; 10' x 44'2".
Rheem Superior #X3198; Design Pressure & Temp: 60 psig @ 20° to 650° F.; 10' x 55'.

Vertical Glycol Vac Still / Glyco Salt

Mfg: Santa Fe Tank & Heater
Capacity: 500 Gallons; 25 psig; Temp: 500° F.; Shell: 3/8" Thick.

Vertical Deenthanizer / Natural Gas - Liquid Hydrocarbons

Mfg: Butane Tank Co.
220 psig; Temp: 650° F.

Deprop / Propane Gas

Mfg: National Tank
450 psig; Temp: 650° F.; Shell: 13/16" Thick.

Vertical Absorber / Natural Gas - Liquid Hydrocarbons

Additional New and Used Equipment Available - Please Call For Complete Listing. We Also Purchase Plant Facilities / Salvage - Cash Offers Made.
NOTE: Some of the items listed above may no longer be in inventory.

Return to Main Page

Projects and References

Contractor's License #535800

P.O. Box 1715
Santa Maria, CA 93456

Phone: (805) 928-4013
Fax: (805) 922-0833

24 Hour Emergency Response for Oil Spills / Hazardous Materials, Contact: Mario Perea
1-800-804-0469

Email: info@rmrinc.com

This site hosted by UTDS, INC. - © Copyright 1997, U-Tech Diversified Services, Inc. and RMR, Inc.